Đăng nhập
Liên hệ
Share :
Description
SEBS-g-MAH Series Toughener
Product Introduction
The SEBS grafted maleic anhydride toughening agent series, with highly reactive and strong polar side groups on non-polar main chains, has good reactivity and flowability. It also retains SEBS’s oxidation and aging resistance, making it widely applicable.
Product Appearance
Milky white or light yellow particles
Product Specifications
Physical Properties Test Method Unit Product Series Grade
TRD-368SE TRD-369SE
Functional Group Content Enterprise Standard MAH wt% 1.2-2.5 1.2-2.5
Melt Flow Rate
（190℃/2.16kg） ASTM D1238 g/10min 0.1-0.5 0.1-0.5
Base Material SEBS SEBS
Notes: The parameters listed are typical laboratory values. Actual performance may vary slightly depending on processing conditions, formulation systems and other factors.
Typical Applications
☆ Used as PA toughening agent, boosting PA’s impact resistance, fatigue resistance and low-temperature toughness.
☆Used as adhesive to provide high initial tack and weatherability.
☆Used in TPE overmolding on PA to enhance compatibility with PA and surface adhesion.
☆Used as ABS and its alloys’ toughening agent to improve impact strength and interfacial bonding, while maintaining product gloss.
Notes
☆The typical addition amount is 3-15%.
☆The specific loading amount should be determined by users on the basis of the application system and the final property requirements of the products, but the critical addition amount of the compatibilizer must be reached.
☆To achieve the best effect, processing equipment and technology should ensure good dispersion of the product in the system.
Product Introduction
The SEBS grafted maleic anhydride toughening agent series, with highly reactive and strong polar side groups on non-polar main chains, has good reactivity and flowability. It also retains SEBS’s oxidation and aging resistance, making it widely applicable.
Product Appearance
Milky white or light yellow particles
Product Specifications
Physical Properties Test Method Unit Product Series Grade
TRD-368SE TRD-369SE
Functional Group Content Enterprise Standard MAH wt% 1.2-2.5 1.2-2.5
Melt Flow Rate
（190℃/2.16kg） ASTM D1238 g/10min 0.1-0.5 0.1-0.5
Base Material SEBS SEBS
Notes: The parameters listed are typical laboratory values. Actual performance may vary slightly depending on processing conditions, formulation systems and other factors.
Typical Applications
☆ Used as PA toughening agent, boosting PA’s impact resistance, fatigue resistance and low-temperature toughness.
☆Used as adhesive to provide high initial tack and weatherability.
☆Used in TPE overmolding on PA to enhance compatibility with PA and surface adhesion.
☆Used as ABS and its alloys’ toughening agent to improve impact strength and interfacial bonding, while maintaining product gloss.
Notes
☆The typical addition amount is 3-15%.
☆The specific loading amount should be determined by users on the basis of the application system and the final property requirements of the products, but the critical addition amount of the compatibilizer must be reached.
☆To achieve the best effect, processing equipment and technology should ensure good dispersion of the product in the system.
Related Products
低烟无卤电缆料相容剂
工程塑料合金增韧剂
工程塑料增韧剂
工程塑料增韧剂
You may also like
Highest Rated Products
Back
Product Inquiry