LDPE/LLDPE RECYCLED PELLETS

rLDPE SC-303N:
Recycled Low Density Polyethylene from Packaging Films

SC-303N is a recycled low density polyethylene (LDPE) pellets formulated from post-consumer packaging waste, it can contain blends of both LDPE and LLDPE, focused on film blowing & casting applications. By default, material colour is natural and dull natural (with variations over time) though colour could be tailored on demand.

APPLICATIONS

DESCRIPTION

Material Colour Presentation
LDPE/LLDPE Natural/Dull Natural Pellets

MATERIAL CHARACTERISTICS

Physical properties2 Test Method Typical value Units

Melt Flow Index (MFI) ISO 1133
(190 °C / 2.16 kg)
2-5
g/10 min
Density ISO 1183 0.900-0.935 g/cm3

Mechanical Properties Test Method Typical value Units
Tensile elastic modulus ASTM D882 300-450 MPa
Tensile strength at yield ASTM D882 23-30 MPa
Tensile elongation at yield ASTM D882 700-900 %

Notes:
This result obtained blends of 70% LLDPE and 30% LDPE.
All properties, with the exception of MFI, are determined in our in-house laboratory on ASTM test specimens obtained by mold test press machine sampling.
Typical values a representative average value.



Disclaimer:
batch because of the recycled materials.
Customer should determined suitability of product according to using conditions.
The customers are responsible from the safety and legality of product.
This TDS includes described product, ASPR is not responsible for occurring mistakes in final product which that the customer’s mixing with other different products
The product is not tested using for food contact, water contact, medical.
Due to nature of recycling products, some variation can be observed in color and other properties. Otherwise, general sale conditions are valid.